If your Mi-pod indication light is working but no vapor is coming out upon inhale/draw you are likely experiencing a connection issue. With some troubleshooting you can get your device working again. Your device will do the following in this situation:
Light up upon inhale but produce no vapor
Charge or indicate a full charge when connected to a charging source
Turn on/off when pressing the power button
REASON
This issue can occur if the two-gold spring loaded contacts inside your device are not cleaned. Another possible reason can be the two gold contacts are pushed in a hair while in their packaging stopping the proper connection to take place inside of the device
TROUBLESHOOTING
The following troubleshooting steps can help to fix this problem:
Check that your device is on: Turn your device on with 5 quick clicks. For troubleshooting turn your device on and off two times. Do the same 5 quick clicks to turn the device off.
Check the inside of your device: Remove your refillable pod. Look at the bottom of your pod to make sure it still has the silicon grommet. If no, the air channel will not seal so the device will not work. Next you want to clean both of the contact pins on the inside of your device. Pocket lint, dirt, juice and other materials can prevent a proper connection. A Q-tip dipped in rubbing alcohol works well for this cleaning process.
Manipulate your pins: The pins on your pod can be manipulated slightly with your fingernail. Pull the pins out just a bit so they can make a connection (DO NOT pull the pins all the way out. Only a millimeter or two max)
Spring loaded pins: The contact pins in your device are spring loaded. Check these pins for give and bounce with a Q-tip or pen. If they are not springy then your device may need to be replaced.
If these tips do not resolve the issue with your device, please follow this link to begin your warranty claim:mipod.com/customer-service
Mi-Pod spit back
WHEN REFILLING - Make sure not to force the bottle tip in so that it seals. If you do, the air has nowhere to go but out the coil. Tilt the pod at 45 degrees when filling and this should help.
To fix this and get the juice cleared - Take the pod out of device, lightly cover the side-airflow with a napkin and carefully blow air through the mouth-tip the. The flooded juice will exit through the side of the pod, be careful as some juice may stain clothing. Then after a few puffs you should be good to go.
WHEN UPSIDE DOWN - (like laying on the couch) - Unfortunately gravity is the issue. When upside down while vaping, the suction combined with vapor condensation will create drops of liquid that slowly pull juice past the cotton. Following our steps to fix flooded pods will remedy this, but it will not prevent it.
If these tips do not resolve the issue with your device, please follow this link to begin your warranty claim:mipod.com/customer-service
How to Charge the Mi-Pod
Simply Charge your Mi-Pod by connecting the provided USB 1 AMP power plug to a 1 AMP wall adapter, then insert the end of the charging cord into the USB on the side of your Mi-Pod. Once the device is plugged in your Mi-Pod will illuminate the LED light. The light will light up according to the level of power it was at upon plugging it in.
Do not plug your device into a laptop, car charger, or gaming appliance. Always be sure to only use a 1 AMP charging cord and wall adapter.
Lost or Broken Charger: You can find the recommended amperage chargers at your local dollar store or convenience store. You can see the AMP information on the back of the wall adapter where the metal prongs are.
If these tips do not resolve the issue with your device, please follow this link to begin your warranty claim:mipod.com/customer-service
Subscribe and Get 10% off Your First Purchase
Be the first to know about exclusive deals, new arrivals, and special offers
